Jun 22

jailbreakThese are the step-by-step instructions on how to jailbreak the OS 3.0 Please read this first. It is wise to read the entire step-by-step instructions once first, before you proceed with the actual procedure.

ALERT!!!!!!!

Please be aware of the risks. Installing the jailbreak is for your own risk and you must be aware that this procedure can go wrong. Functions on the iPhone 2G, 3G and 3GS that don’t work anymore, after the procedure are not our fault.

ALERT!!!!!!!

Step 1

Make sure you got iTunes 8.2 installed. (If you updated to iPhone OS 3.0 you have it installed )

Step 2

Create a new folder on your Desktop called “Pwnage”. Inside you will need PwnageTool 3.0 andthe 3.0 iPhone firmware

jailbreak iphone OS 3.0 1 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 3

Double click to mount the PwnageTool dmg , drag it to the Pwnage folder and  launch it.

jailbreak iphone OS 3.0 2 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 4

You will get a warning that the tool is free and its not for commercial use blablabla. Just click OK and proceed.

jailbreak iphone OS 3.0 3 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 5

At the top of the windows you will have multiple “modes”. MAKE SURE YOU CHOOSE “EXPERT MODE”

jailbreak iphone OS 3.0 4 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 6

Select your iPhone or iPod from the three devices shown. When you select your device, a large checkmark appears over the selected device. Then click the blue arrow button at the bottom right.



jailbreak iphone OS 3.0 52 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 7

Next step is to choose the FW. On my MBP, it automatically found the IPSW. If PwnageTool doesn’t automatically find the ipsw file you can click Browse for IPSW… button.

jailbreak iphone OS 3.0 6 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Once found, click to select the found IPSW file, a checkmark will appear next to it. Then click the blue arrow button to continue.

jailbreak iphone OS 3.0 7 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 8

On the next window you will have multiple choices. Click to select General then click the blue arrow button.

jailbreak iphone OS 3.0 81 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 9

The General settings allows you to decide the partition size. Click activate the phone and Disable partition wipe-out. Click the blue arrow button.

NOTE 1: Deselect Activate if you have an iPhone legitimately activated on an official carrier.

NOTE 2: You may need to increase the size of the root partition slightly. My first attempt failed at creating the IPSW until I increased the size to about 695 MB.

jailbreak iphone OS 3.0 9 400x351 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 10

The Bootneuter settings are greyed out for the 3G iPhone. Click the blue arrow button.

jailbreak iphone OS 3.0 10 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 11

In the next screen, you can create custom packages so you do not have to manually install them later.

jailbreak iphone OS 3.0 11 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Click to select the Download packages tab. Then click the Refresh button to display all the available packages. Double clicking the package you want will download it and make it available in the Select Packages tab.

jailbreak iphone OS 3.0 12 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Checkmark the ones you want then Click the blue arrow button.

jailbreak iphone OS 3.0 13 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

The Custom Packages Settings menu displays listed package settings for your custom IPSW. For know leave these settings as is. Click the blue arrow button to continue.


jailbreak iphone OS 3.0 14 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 12

In the next step you will have the option to choose the custom boot logos. I suggest you DONT install them. Because at any point if anything happens to the device, and you take it to Apple with the custom logos, you’ll pretty much be fucked. Thats the only way they could know your iPhone was/is jailbroken

Picture 1

Step 13

You are now ready to begin the pwnage process! Click the Build button to select it then click the Blue arrow button to begin.

Picture 2

Step 14

You will be asked to save your custom .ipsw file. Save it to your Pwnage folder you created on your Desktop. Now the tool is building the custom .ipsw file. It will take up to 10 minutes, so be patient.

Picture 3

At one point you will be prompted to insert you admin password.

jailbreak iphone OS 3.0 15 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Step 15

Next, you will be asked if your device was jailbroken before. You should click on NO. Clicking no will allow you to do a more thorough restore.

Picture 4

Step 16

If you device is connected ( make sure you connect your device ), it will ask you to turn it OFF. Than be ready to follow the steps on the screen in order to get the device into DFU mode.

Picture 5

NOTE: If you fail, it will show you a message. Click Yes. Unplug the iPhone from the USB. Turn it off, then turn it back on. Plug it back into the USB and turn off the iPhone when prompted.If done correctly it will prompt you with this message:

Picture 6

Step 17

Now open iTunes. It will prompt you with a message that iTunes found a iPhone in restore mode. Now hold the Alt/Option key and click on restore. Browse to the Pwnage folder on your desktop using the dialog window that appears. Select the custom IPSW that was created (iPhone1,2_3.0_7A341_Custom_Restore.ipsw) and click the Open button.

Now iTunes will restore the firmware on your iPhone. This can also take up to 10 minutes.

Picture 10

That’s it. Congrats!!!

iPhone 2G

For iPhone 2G, follow the same tutorial as above, but pay attention to this differences.

The General settings allows you to decide the partition size. Click activate the phone and Disable partition wipe-out. Click the blue arrow button.

………………
16348 500 HowTo: Jailbreak iPhone OS 3.0 ( Mac )
NOTE1: If the Enable Baseband checkbox is not greyed out, checkmark it. This will allow the unlock to occur!***
NOTE 2: For the 3.0 firmware you may have to increase the size of your root partition slightly for the IPSW build to be successful. 590MB worked just fine for me***

In the Bootneuter settings, click Neuter bootloader, Unlock baseband, and Auto-Delete BootNeuter.app. It is not necessary to upgrade the bootloader unless you are really feeling the need to be on 4.6. Click the blue arrow button to continue.
16349 500 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

…………………………………………………..

You are now ready to build your custom firmware. Click the build button to select it, then click the blue arrow button.
16363 500 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

If this is the first time doing this, you will be asked to upload the 3.9 and 4.6 BL files. When prompted to search the web, click no.
16230 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

You will prompted to browse for the 3.9BL file. Click Yes then select the file(BL-39.bin) from the Pwnage folder you created on your desktop and click the Open button.
16231 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Select the file in the Pwnage folder on your desktop and click the Open button.

Do the same for 4.6.
16232 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

16233 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

***: After loading the 4.6 BL you may be asked if you’re a legit user. If you legally have ATT or an iPhone plan in a different country, clicking yes will not unlock the iPhone and activate it as your legal plan already activates it and there is no need for an unlock. However if you wish to keep the iPhone unlocked, when asked if you’re a legit iPhone user, click no

After both are found. You will be asked to save your custom .ipsw file. Save it to your Pwnage folder on the desktop.
16350 500 HowTo: Jailbreak iPhone OS 3.0 ( Mac )

Leave a Reply